skip to Main Content

Australian madeTraffikDrain

TraffikDrainTraffikDrain combines the benefits of PolycreteRegistration mark Channels with a choice of purpose designed grates to minimise ponding and other dangers for road users.

The iron Hi-Flo and Transverse grates ensure maximum water intake, resulting in quick and efficient water removal from the road surface. The Heelsafe® Anti-Slip grate provides pedestrian safety in heavily foot trafficked areas.

All grates are secured with the PowerLok® boltless locking mechanism that enables quick and easy access for maintenance operations.

TraffikDrain Features
1SF Sealant Groove is cast into both ends of the channel and allows for a bead of flexible sealant to be applied at the channel joints. The sealant ensures contaminated water does not infiltrate into environmentally sensitive areas. 8Hi-Flo, Intercept Heelsaferegistration mark Anti-Slip and Transverse ductile iron grates are heavy duty and rated up to AS 3996 Load Class D (approx 8 tonne wheel load)
2Every fifth sloped channel and all neutral channels have a knock-out area to allow for a vertical outlet connection to the pipework 9Integrally cast-in ductile iron edge rail provides maximum strength and protection for channel body.
3Interconnecting end profiles allow easy and effective joining of channels. 10Polymer concrete is a durable, lightweight material made from a polyester resin binder, reinforced by mineral aggregates and fillers.
4‘V’ profile channels promote higher velocities during minor storm events resulting in a more hydraulically efficient drain compared to ‘U’ profile
channels.
11Profiled side walls provide channel body strength and mechanical keying to concrete encasement.
5Recesses in grates fit around anti-shunt lugs on the edge rail to prevent longitudinal movement under dynamic wheel loads. 12PowerLok® is a patented, boltless locking system that provides easy fitting and removal of grates. It reduces installation and maintenance time.
6Sloped channel, metre long lengths provide 40 metres of continuous (0.5%) slope, that equates to 5mm of built-in fall per metre. Five neutral channel depths are available to extend run length. 13Installation devices are available from ACO, to reduce installation time and labour costs. The device clamps the channels together
and braces them to prevent movement. The device also stops the channels from floating during the single concrete pour.
7Channel numbering is located on the sidewalls and the invert base of the channel. The number of the connecting channel is embossed and located at the end of each channel to aid identification.

TD200 Grate & Channel system

System Layout

Typical system layout – TD200 / TD300

traffikdrain typical system layout

Grates Parts List
TD200 Grates
(to suit 200mm channels)
Length
mm
Part
No.
 wheelchair compliant heel safe bicycle wheel safe pedestrian safe Spec
Info
Water
Intake
LOAD CLASS D 210kN – AS 3996 (approximate wheel load 8,000kg)
grate iron hi-flo Iron Hi-Flo 500 142127 No No Yes No pdf water intake
grate iron intercept Iron Intercept1 Heelsafe® Anti-Slip 500 142125 Yes Yes Yes Yes pdf water intake
grate iron transverse Iron
Transverse
500 142145 No No Yes No pdf water intake
Channels Parts List
TD200 – 200mm internal width Channel
Part No.
Invert2
mm
Weight
kg
00 Neutral channel (1m)1 148041 200 36.1
1 Sloped channel (1m) 148001 205 36.1
2 Sloped channel (1m) 148002 210 36.6
3 Sloped channel (1m) 148003 215 37.1
4 Sloped channel (1m) 148004 220 37.6
5 Sloped channel (1m)1 148005 225 38.1
6 Sloped channel (1m) 148006 230 38.6
7 Sloped channel (1m) 148007 235 39.1
8 Sloped channel (1m) 148008 240 39.6
9 Sloped channel (1m) 148009 245 40.1
10 Sloped channel (1m)1 148010 250 40.6
010 Neutral channel (1m)1 148043 250 40.6
0103 Neutral channel (0.5m)1 148044 250 40.6
11 Sloped channel (1m) 148011 255 41.4
12 Sloped channel (1m) 148012 260 41.6
13 Sloped channel (1m) 148013 265 42.1
14 Sloped channel (1m) 148014 270 42.6
15 Sloped channel (1m)1 148015 275 43.1
16 Sloped channel (1m) 148016 280 43.6
17 Sloped channel (1m) 148017 285 44.1
18 Sloped channel (1m) 148018 290 44.6
19 Sloped channel (1m) 148019 295 45.1
20 Sloped channel(1m)1 148020 300 45.6
020 Neutral channel (1m)1 148045 300 45.6
0203 Neutral channel (0.5m)1 148046 300 29.9
21 Sloped channel (1m) 148021 305 46.1
22 Sloped channel (1m) 148022 310 46.6
23 Sloped channel (1m) 148023 315 47.1
24 Sloped channel (1m) 148024 320 47.6
25 Sloped channel (1m)1 148025 325 48.1
26 Sloped channel (1m) 148026 330 48.6
27 Sloped channel (1m) 148027 335 49.1
28 Sloped channel (1m) 148028 340 49.6
29 Sloped channel (1m) 148029 345 50.1
30 Sloped channel (1m)1 148030 350 50.6
030 Neutral channel (1m)1 148047 350 50.6
0303 Neutral channel (0.5m)1 148048 350 32.0
31 Sloped channel (1m) 148031 355 51.2
32 Sloped channel (1m) 148032 360 51.7
33 Sloped channel (1m) 148033 365 52.2
34 Sloped channel (1m) 148034 370 52.7
35 Sloped channel (1m)1 148035 375 53.2
36 Sloped channel (1m) 148036 380 53.7
37 Sloped channel (1m) 148037 385 54.2
38 Sloped channel (1m) 148038 390 54.7
39 Sloped channel (1m) 148039 395 55.2
40 Sloped channel (1m)1 148040 400 55.7
040 Neutral channel (1m)1 148049 400 55.7
0403 Neutral channel (0.5m)1 148050 400 36.0

Notes:
1. These channels have a knock-out for a vertical outlet: TD200 – 100mm and 150mm round, TD300 – 150mm and 200mm round.
2. Inverts shown are male end, for female invert depths – subtract 5mm from male invert (except neutral channels where it will be the same as the male invert). To calculate overall channel depth, add 25mm to invert depth.

TD200 Pits & Accessories
TD200 – 200mm internal width Part No. Invert Weight
kg
Type 900 In-line pit (0.5m)3 142687 8435 32.3
Type 900 In-line plastic rubbish basket 13999 - 0.5
Universal end cap 96823 4205 0.6
Debris strainer for 100mm knockout 93488 - 0.1
Installation device 97478 - 1.8
Grate removal tool 01318 - 0.1
PowerLok safety clip 10443 - -

Notes:
3. Type 900 In-line pit assembly (Polycrete® top and plastic base).
4. Type 614 In-line pit assembly (Polycrete® top and Polycrete® base).
5. Overall depth of in-line pit and end caps.

TD300 Grate & Channel system

System Layout

Typical system layout – TD200 / TD300

traffikdrain typical system layout

Grates Parts List
TD300 Grates
(to suit 300mm channels)
Length
mm
Part
No.
 wheelchair compliant heel safe bicycle wheel safe pedestrian safe Spec
Info
Water
Intake
LOAD CLASS D 210kN – AS 3996 (approximate wheel load 8,000kg)
grate iron hi-flo Iron Hi-Flo 500 142128 No No Yes No pdf water intake
grate iron intercept Iron Intercept1 Heelsafe® Anti-Slip 500 142126 Yes Yes Yes Yes pdf water intake
grate iron transverse Iron
Transverse
500 142146 No No Yes No pdf water intake
Channels Parts List
TD300 – 300mm internal width Channel
Part No.
Invert2
mm
Weight
kg
00 Neutral channel (1m)1 149041 300 59.1
1 Sloped channel (1m) 149001 305 59.1
2 Sloped channel (1m) 149002 310 59.6
3 Sloped channel (1m) 149003 315 60.2
4 Sloped channel (1m) 149004 320 60.7
5 Sloped channel (1m)1 149005 325 61.3
6 Sloped channel (1m) 149006 330 61.9
7 Sloped channel (1m) 149007 335 62.4
8 Sloped channel (1m) 149008 340 63.0
9 Sloped channel (1m) 149009 345 63.5
10 Sloped channel (1m)1 149010 350 64.1
010 Neutral channel (1m)1 149042 350 64.1
0103 Neutral channel (0.5m)1 149045 350 35.3
11 Sloped channel (1m) 149011 355 64.6
12 Sloped channel (1m) 149012 360 65.2
13 Sloped channel (1m) 149013 365 65.8
14 Sloped channel (1m) 149014 370 66.3
15 Sloped channel (1m)1 149015 375 66.9
16 Sloped channel (1m) 149016 380 67.4
17 Sloped channel (1m) 149017 385 68.0
18 Sloped channel (1m) 149018 390 86.5
19 Sloped channel (1m) 149019 395 69.1
20 Sloped channel(1m)1 149020 400 69.7
020 Neutral channel (1m)1 149044 400 69.7
0203 Neutral channel (0.5m)1 149047 400 38.5
21 Sloped channel (1m) 149021 405 70.2
22 Sloped channel (1m) 149022 410 70.8
23 Sloped channel (1m) 149023 415 71.4
24 Sloped channel (1m) 149024 420 71.9
25 Sloped channel (1m)1 149025 425 72.4
26 Sloped channel (1m) 149026 430 73.0
27 Sloped channel (1m) 149027 435 73.6
28 Sloped channel (1m) 149028 440 74.1
29 Sloped channel (1m) 149029 445 74.7
30 Sloped channel (1m)1 149030 450 75.3
030 Neutral channel (1m)1 149046 450 75.3
0303 Neutral channel (0.5m)1 149049 450 41.8
31 Sloped channel (1m) 149031 455 75.8
32 Sloped channel (1m) 149032 460 76.4
33 Sloped channel (1m) 149033 465 76.9
34 Sloped channel (1m) 149034 470 77.5
35 Sloped channel (1m)1 149035 475 78.1
36 Sloped channel (1m) 149036 480 78.6
37 Sloped channel (1m) 149037 485 79.2
38 Sloped channel (1m) 149038 490 79.7
39 Sloped channel (1m) 149039 495 80.3
40 Sloped channel (1m)1 149040 500 80.8
040 Neutral channel (1m)1 149048 500 80.8
0403 Neutral channel (0.5m)1 149050 500 45.5

Notes:
1. These channels have a knock-out for a vertical outlet: TD200 – 100mm and 150mm round, TD300 – 150mm and 200mm round.
2. Inverts shown are male end, for female invert depths – subtract 5mm from male invert (except neutral channels where it will be the same as the male invert). To calculate overall channel depth, add 25mm to invert depth.

TD300 Pits & Accessories
TD200 – 200mm internal width Channel
Part No.
Invert2
mm
Weight
kg
Type 900 In-line pit (0.5m)3 142688 9565 39.9
Type 900 In-line plastic rubbish basket 98653 - 1.6
Optional plastic riser 141729 300 4.5
Plastic rubbish basket – long 98665 - 1.8
Type 614 in-line pit (0.5m)4 142689 12615 103.2
Universal end cap 96827 5205 1.1
Installation device 97478 - 2.2
Grate removal tool 01318 - 0.1
PowerLok safety clip 10443 - -

Notes:
3. Type 900 In-line pit assembly (Polycrete® top and plastic base).
4. Type 614 In-line pit assembly (Polycrete® top and Polycrete® base).
5. Overall depth of in-line pit and end caps.

Back To Top